DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2010-07-31 19:54:31

sala
Member / Site Admin
From: Estonia
Registered: 2006-07-28
Posts: 731
Website

v3.23 firmware for NSA-220(plus)

New version is available for plus version and regular nsa-220 should have update soon.

http://www.zyxelforum.de/nsa-2xx-serie- … t1543.html

Anyone going to request GPL code this time?


• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS

Offline

 

#2 2011-01-21 17:50:52

BobE
Member
From: NJ, USA
Registered: 2007-03-24
Posts: 21

Re: v3.23 firmware for NSA-220(plus)

Trying to upgrade my box from the original FW version [ 3.10(AFG.0) ] using the GUI ... but no matter which one of the later FW .BIN files I try all I end up with after the "Please wait..." message box is an error message stating "Invalid firmware file."   I have tried this process from different computers as well with the same result.

Any help?  Am I missing something that's obvious?  I've downloaded the package(s) directly from ZyXel several times...always making sure I'm in the correct model (NSA-220 Plus.)  Any suggestions or clues would be greatly appeciated.  Thanks!

Last edited by BobE (2011-05-18 23:35:38)


• DNS-323 A1 | FW1.09 | 2x WD20EVDS AV-GP 2TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | ffp 0.5,  Samba 3.4.6-1

• NSA-220+ | FW3.23 | 2x WD15EADS “Green” 1.5TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | External USB: Kingston DT1 2GB Flash Drive ( ffp 0.5 )

Offline

 

#3 2011-01-21 20:27:13

Mijzelf
Member / Developer
Registered: 2008-07-05
Posts: 678

Re: v3.23 firmware for NSA-220(plus)

I think you have to upgrade to 3.12 first, using an usb-stick.

Offline

 

#4 2011-01-22 00:28:45

BobE
Member
From: NJ, USA
Registered: 2007-03-24
Posts: 21

Re: v3.23 firmware for NSA-220(plus)

BINGO!  That did the trick.  First needed to upgrade to 3.12 via usb-stick, then was able to upgrade directly to latest version (3.23.)  Got a little worried after the initial reboot from 3.12 due to SYS light flashing for very long time, but then NAS came up without any issues.  Ditto for second upgrade to latest version.

Your knowledge and timely response with the one hint I needed is very much appreciated!

-Bob

Last edited by BobE (2011-05-18 23:35:52)


• DNS-323 A1 | FW1.09 | 2x WD20EVDS AV-GP 2TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | ffp 0.5,  Samba 3.4.6-1

• NSA-220+ | FW3.23 | 2x WD15EADS “Green” 1.5TB SATA 3.0Gb/s 7200RPM, 32MB | RAID1 | ext3 | External USB: Kingston DT1 2GB Flash Drive ( ffp 0.5 )

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB