DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

#26 2007-02-06 18:30:01

cbrunnkvist
Member
From: Helsingborg, Sweden
Registered: 2007-01-20
Posts: 13

Re: What SATA hard drives have been tested with the DNS-323?

mklx01 wrote:

I have a Western Digital Caviar SE16 WD5000AAKS with 500GB and 16MB cache (the new 3 platter version). Works great.

I have successfully been using the SE16 line too, no problems there.

Fact is, I recently switched a  Seagate Barracuda 7200.10 320GB (ST3320620AS) for a Western Digital Caviar SE16 320GB (WD3200KS) after I got the impression that the SE16 perhaps was just a little more quiet.

Turned out there was not much difference; maybe the SE16 seems to vibrate slightly less...

Offline

 

#27 2007-02-06 23:41:41

ondro727
Member
Registered: 2007-01-30
Posts: 19

Re: What SATA hard drives have been tested with the DNS-323?

Using 2x SAMSUNG 400GB SATA2 16MB HD401LJ. No problems here yet (>2 months). Well, no hardware problems... smile As for ext3 I originally used, well, now I know what 250GB of data lost means smile Drives themselves are OK, power management works fine, drives are very qiuet and they stay pretty cool.

Offline

 

#28 2007-02-09 21:11:57

nastim
New member
Registered: 2007-02-09
Posts: 1

Re: What SATA hard drives have been tested with the DNS-323?

I'm ready to buy the drives to put in a DNS 323. So I'm wondering if I should spend a few extra bucks on the RE2 drives - whether the TLER feature works with the DNS 323 or just buy regular SATA drives?

I saw a couple other mentions of this - but no outright answer.  Does anyone know for sure?

Offline

 

#29 2007-02-09 21:30:38

tobyg
Member
Registered: 2007-01-31
Posts: 42

Re: What SATA hard drives have been tested with the DNS-323?

nastim wrote:

I'm ready to buy the drives to put in a DNS 323. So I'm wondering if I should spend a few extra bucks on the RE2 drives - whether the TLER feature works with the DNS 323 or just buy regular SATA drives?

I saw a couple other mentions of this - but no outright answer.  Does anyone know for sure?

I don't have an answer either... but basically it's not as much a question if the DNS-323 supports TLER, the question is if Linux, specifically kernel 2.6.6 (as of now) supports it.  That may help you in your quest.

My 'guess' is it won't.

Offline

 

#30 2007-02-10 21:00:32

materofdi
Member
Registered: 2007-02-09
Posts: 10

Re: What SATA hard drives have been tested with the DNS-323?

i have 2x Samsung SpinPoint T166 320GB 16MB SATA II (HD321KJ) on my dns-323 with fw 1.02b. its's running very nice.

Offline

 

#31 2007-02-12 23:33:43

spin
New member
Registered: 2007-02-09
Posts: 2

Re: What SATA hard drives have been tested with the DNS-323?

Surprised no one else is running the 500 GB Maxtor Maxline Pro (7H500F0) since Seagate's unloading for cheap (~140) them after buying out Maxtor.  Running 2 in a raid 1.  I'll post the proc entry later.

Offline

 

#32 2007-03-01 20:39:50

kimhav
Member
From: Klagshamn, Sweden
Registered: 2007-01-08
Posts: 56
Website

Re: What SATA hard drives have been tested with the DNS-323?

New unit and making use of 2 x Seagate Barracuda ES 500gb SATA/300 16MB (ST3500630NS) in RAID1 with fw 1.02b.


Kim Haverblad
Klagshamn, Sweden
http://kim.haverblad.se

Offline

 

#33 2007-03-06 22:40:19

WildSioux
Member
Registered: 2007-03-05
Posts: 71

Re: What SATA hard drives have been tested with the DNS-323?

mig wrote:

I have two Seagate Barracuda ES 7200.10 SATA II (3.0Gb/s) 250GB hard drives
which are working fine. RAID 1 (mirror), Ext2, firmware v1.02

Vendor: Seagate   Model: ST3250620NS       Rev: 3.AE

Same drives and setup I used for my parents DNS323.

yerbie wrote:

2 Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s

Running raid 1

Same drives and setup in mine...

No problems on either system...

Offline

 

#34 2007-03-07 02:20:34

phil
Member
From: California
Registered: 2007-02-21
Posts: 32

Re: What SATA hard drives have been tested with the DNS-323?

I have two Seagate ST3500641AS (500 GB) and they work fine too.


cool D-Link DNS-323 2x Seagate Barracuda 7200.9 ST3500641AS 500GB SATA2 7200RPM 16MB NCQ RAID1 F/W: 1.03 ext2
cool D-Link DSM-320RD MediaLounge Streaming Media Player with DVD and Card Reader F/W: 1.04 wired network
big_smile D-Link DSM-510 MediaLounge Streaming Media Player HDMI 1080i F/W: 1.07 wired network

Offline

 

#35 2007-03-19 12:50:55

KainGaelt
New member
Registered: 2007-03-19
Posts: 4

Re: What SATA hard drives have been tested with the DNS-323?

Ive got two Seagate 400GB Bar ST3400620AS SATA2 7200.10 16mb runningh fine, RAID1 F/W: 1.02b ext2

!!!!!!!!Seagate ST3400633AS 400GB SATA -II NCQ 16MB doesnt work!!!!!

Offline

 

#36 2007-04-22 23:05:15

GreenGiant
Member
From: Dublin, Ireland
Registered: 2007-04-22
Posts: 10

Re: What SATA hard drives have been tested with the DNS-323?

I recently purchased the unit.
I got two ST3400633AS - Seagate 400gb 7200.9 16mb ready to rock ..

only to get a 'no hard drives detected'

very disappointed. Will a firmware upgrade to the unit save my bacon, or am I off to the bank for more debt to buy disks?

By the way according to D-Link these drives have been tested and work

Hitachi
HDT722525DLA380 250GB
HDS725050KLA360 500GB
HDS722580VLSA80 80GB

Maxtor
6V080E0 80GB
6L300S0 300GB
6Y120M0 120GB

Samsung
SP1213C 120GB

Seagate
ST380810AS 80GB
ST3200826AS 200GB
ST3400832AS 400GB
ST3400833NS 400GB
ST3400633NS 400GB
ST3750640NS 750GB *

Western Digital
WD800JD-00LSA0 80GB
WD1600JS 160GB
WD2000JS 200GB
WD4000KD 400GB

Last edited by GreenGiant (2007-04-22 23:16:51)

Offline

 

#37 2007-04-23 14:45:12

oceand
New member
Registered: 2007-04-23
Posts: 3

Re: What SATA hard drives have been tested with the DNS-323?

I purchased the same Seagate ST3400633AS with no luck. The dns323 simply flashes the hard drive access light over and over again. Its laughing at me. Anyway changed over to a 300 gig Maxtor with zero problems.

Unfortently flashing the unit to the latest firmware doesn't help.

Offline

 

#38 2007-04-23 15:42:38

fordem
Member
Registered: 2007-01-26
Posts: 1938

Re: What SATA hard drives have been tested with the DNS-323?

Seagate Barracuda 7200.9 - ST3250824AS
Maxtor DiamondMax Plus 9 - 6Y080M0
Maxtor DiamondMax 10 - 6L250S0

Offline

 

#39 2007-04-26 17:21:49

patl
New member
Registered: 2007-04-26
Posts: 2

Re: What SATA hard drives have been tested with the DNS-323?

interesting, I assume it's all about drive revisions. I have a brand new pair of ST3500641AS and the drive lights just flashe. Shame given how cheap they are for 500Gb drives ATM. drive firmware is 3.AAD if its any help. Any bad experiences with the HD501LJ before I empty my wallet some more?

Offline

 

#40 2007-04-27 00:07:39

animaal
Member
Registered: 2007-04-27
Posts: 8

Re: What SATA hard drives have been tested with the DNS-323?

I have two of the following in RAID1:

Seagate Barracuda 7200.9 500GB S300 (ST3500641AS)

Works flawlessly.

Edit: more detail below

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: Seagate  Model: ST3500641AS      Rev: 3.AA
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: Seagate  Model: ST3500641AS      Rev: 3.AA
  Type:   Direct-Access                    ANSI SCSI revision: 03

Last edited by animaal (2007-04-27 00:11:16)

Offline

 

#41 2007-04-27 11:58:28

patl
New member
Registered: 2007-04-26
Posts: 2

Re: What SATA hard drives have been tested with the DNS-323?

As two people seem to have these working, I'm wondering whether I'm missing a trick here. I can stick other sata drives in the dns-323 and it recognises them fine, so I assume the box is fine. Did you do anything to the unit or the drives to get these drives working in the unit?

Thanks,

Pat.

Offline

 

#42 2007-04-27 12:56:06

animaal
Member
Registered: 2007-04-27
Posts: 8

Re: What SATA hard drives have been tested with the DNS-323?

patl wrote:

Did you do anything to the unit or the drives to get these drives working in the unit?

No - I received the drives and NAS at the same time, and the first thing I did was plug in the drives. Everything just worked. The only thing that seems different is that you revision number is 3.AAD, where mine is 3.AA.

Offline

 

#43 2007-04-27 19:53:01

phil
Member
From: California
Registered: 2007-02-21
Posts: 32

Re: What SATA hard drives have been tested with the DNS-323?

I'm the other guy with the pair of the Seagate ST3500641AS 500GB and it works without any problems and without having to do anything unusual.  All I did was install the 1.02b firmware (latest version at that time) before I started since I knew this 1.02b firmware was available for download.  Then upgraded with 1.03 when Aaron posted the new firmware availability a few weeks ago.  (Works fine with both 1.02b and 1.03 here.)

My first ST3500641AS drive is the retail type/kit.  It came from Fry's during the after-Thanksgiving sale last year.  It sat in that box for some time until I got the DNS-323.  I was actually going to put it in my PC and load Vista on it, but later bought a laptop and basically phased out that PC usage.  Looking at the label on this drive, it says Firmware 3.AAJ and the date code is 07017.  This one went into the left-side slot which is slot 1.

My second drive is an OEM type (without the big retail box/kit).  This drive came from Newegg in early/mid February this year.  On the drive/label/sticker itself, it says Firmware 3.AAK and the Date Code is 07237.  This one is in the right-side slot (slot 0, I guess... and didn't know which is slot 0 at that time or they both would have been swapped during the initial setup).


cool D-Link DNS-323 2x Seagate Barracuda 7200.9 ST3500641AS 500GB SATA2 7200RPM 16MB NCQ RAID1 F/W: 1.03 ext2
cool D-Link DSM-320RD MediaLounge Streaming Media Player with DVD and Card Reader F/W: 1.04 wired network
big_smile D-Link DSM-510 MediaLounge Streaming Media Player HDMI 1080i F/W: 1.07 wired network

Offline

 

#44 2007-04-27 21:47:18

Ethereal_Dragon
Member
From: Bolingbrook, IL - USA
Registered: 2007-02-05
Posts: 54
Website

Re: What SATA hard drives have been tested with the DNS-323?

Mine have worked fine since FW version 1.0... model's listed in my sig.


Gaming Rig: ASUS Z87-PRO (V EDITION), Intel Core i5-4590 Haswell, HyperX FURY 8GB DDR3 1866,
XFX Radeon HD 4870, SILVERSTONE DA700, Samsung 840 500Gig SSD MZ-7TD500BW, 3x WD20EARS 2 TB Green,
ASUS DRW-2014L1T (DVD), LG WH14NS40 (Blu Ray), Dell 2709W, Sony SDM-HS95P, Windows 10 Pro
The NAS Box: D-Link DNS-323, 0.1RC3 Alt-F firmware, 2x 7200.14 ST3000DM001 3TB EXT4 - NO RAID - 6 TB

Offline

 

#45 2007-05-27 02:41:41

lelle
Member
From: Stockholm, Sweden
Registered: 2007-05-23
Posts: 5

Re: What SATA hard drives have been tested with the DNS-323?

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SAMSUNG  Model: HD501LJ          Rev: CR10
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: SAMSUNG  Model: HD501LJ          Rev: CR10
  Type:   Direct-Access                    ANSI SCSI revision: 03

Offline

 

#46 2007-06-14 00:23:31

BravoTEK
New member
Registered: 2007-06-13
Posts: 2

Re: What SATA hard drives have been tested with the DNS-323?

A pair of the following work just fine on FW: 1.03 in RAID1.

Hitachi Deskstar 7K1000 1TB SATA (HDS721010KLA330)

Reported as 982880MB. (~960GB)

However! FW: 1.01 reported 960GB when setting up the RAID. (I actually stopped the format whilst it was in process because I noticed 1.03 was available! oops! this caused one of the drives LED's to go amber! uh-oh.)
After upgrading from 1.01 to 1.03, and re-setting to RAID1, all was well, but during the setup, it reported the drive to be 998GB... still working fine as i continue to offload all my media onto the 323 from 2 machines.

Runs warm at ~47C during heavy usage. Ambient room temp is ~24C

Did consider setting up as RAID 0.... NOT! tongue

Last edited by BravoTEK (2007-06-14 11:46:43)

Offline

 

#47 2007-06-14 12:54:05

index monkey
Member
From: UK
Registered: 2007-06-14
Posts: 112

Re: What SATA hard drives have been tested with the DNS-323?

2 x Samsung Spinpoint sata2 500gb work just fine.


DNS-323, HW B1, 2 x 2TB WD green, fw 1.08, fun_plug 0.5, transmission, automatic, nzbget newsreader & rsync time machine backup.

Offline

 

#48 2007-09-21 01:19:18

blizzard182
Member
Registered: 2007-09-20
Posts: 52

Re: What SATA hard drives have been tested with the DNS-323?

mklx01 wrote:

I have a Western Digital Caviar SE16 WD5000AAKS with 500GB and 16MB cache (the new 3 platter version). Works great.

Same here.

I am planning to add 1TB disk as soon as they drop the price.

Now it is time to buy a 500. I assume that after Christmas 1TB disks will be cheaper.

Offline

 

#49 2007-09-21 12:04:22

Thiam
Member
Registered: 2007-06-18
Posts: 43

Re: What SATA hard drives have been tested with the DNS-323?

Running 4 DNS boxes FW 1.03 (1 at home, 3 at work) each with these two disks:

Western Digital Caviar SE WD5000AAJS 500 GB - 7200 tpm - Serial ATA-II

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: WDC      Model: WD5000AAJS-00TKA Rev: 12.0
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: WDC      Model: WD5000AAJS-00TKA Rev: 12.0
  Type:   Direct-Access                    ANSI SCSI revision: 03

I find them very quiet, and I got them cheap too, they were 95 excl. in some kind of promo.


Thiam

Offline

 

#50 2007-09-23 05:50:38

Tha187um
New member
Registered: 2007-09-23
Posts: 2

Re: What SATA hard drives have been tested with the DNS-323?

2 X Western Digital Caviar SE16 WD7500AAKS 750GB 7200 RPM SATA 3.0Gb/s

So far so good, I decided to play it safe and set them to Raid 1

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB